Upgrade Features:
- Upper and lower double heating plate, 360° surround heating.
· Can be heated to 70℃,
Special materials such as PA, PC can be dried.· Extra large 4.6 inch(3.42*2.87) touch screen LCD monitor.
Display temperature, humidity, consumable type, countdown time.
· Dual temperature probes detect temperature, the temperature is more accurate.
· LED marquee light, showing real-time working status. The greater the difference between the measured temperature and the set temperature, the faster the upward accumulation speed; the temperature difference and the accumulation speed change in the same direction.
Estimate the drying effect
According to the humidity in the box: the humidity first rises and then fallsduring the printing process.
Reference settings:
PLA/PLA+/SILK/Wood/PETG: 45℃-50℃, 3-6 Hours.
ABS/ABS+/TPU/PVB/HIPS/PVA/ASA/PMMA: 50℃-55℃, 3-6 Hours.
PA/PC: 60℃-70℃, 3-6 Hours.
Filamnet | PLA/PLA+/ SILK | Wood | PETG | PVB | ABS/ABS+ | HIPS | PVA | ASA | TPU | PMMA | PA/PC |
Dry Temp (℃) | 45-50 | 50-55 | 60-70 | ||||||||
Dry Time (H) | 3-6 Hours | ||||||||||
Suggestion | 1: Before printing, it is recommended to bake first and then print; after baking, it is better to print while baking. 2: When the ambient temperature is too low and the drying oven does not heat up to the set value, it is recommended to extend the baking time for more than 1 hour. 3: Reference table for drying time and temperature of commonly used consumables. |
360° Surround Heating:
Upper and lower double heating plate
· Heating speed twice faster than most drying box in the market.
· Evenly heatingtemp from top to bottom, better drying.
Temperature Switchable:
- Temperature adjustment range: 35℃~70℃.
LED Touch-screen
- 4.6 inch size: Display multiple contents simultaneously
· Touch operation: Convenient and flexible the operation
· Display temperature, humidity, consumable type, countdown time.
Compare the drying effect:
Effectively reduce moisture in filaments and reduce printing bubbles.
Intelligent control:
Intelligent presets for multiple filaments and drying modes, no need manual setting.
You can set drying modes that you want to. Once set up, you can use it all the time.
Details Description:
The filament can be printed while drying through this hole, and the moisture obtained from drying can be discharged at the same time.
Watch out for edge cases:
If the filament have too much moisture or the environment is too humid, when the drying oven is used for rapid drying at a relatively high temperature, a large amount of water may evaporate in a short period of time.
In this case, open the drying box and then quickly closed, and then continute the drying after the water is drained.
This operation can quickly reduce the humidity in the box and effectively reduce the drying time.
Product Parameter:
Product Parameter:
Product size: 265(L) X274(W) X 118(H) mm
Max coil size: φ210*85(H)mm
Net weight: 1190g (including power adapter)
Working Environment:
Ambient temperature: 20℃~35℃
Relative humidity: ≤90%
Temperature setting range: 35℃~70℃
Power Adapter Specifications:
Input specification: AC 100V~240V, 50/60Hz
Output specification: DC: 24V±1.2V, 2A
Standby power: 0.05W
Maximum operating current: 1.8A
Maximum working power: 48W
LCD screen size:4.6 inch(3.42*2.87) Touch Screen
Consumable wire diameter: 1.75mm/2.85mm/3.00mm
Reviews
There are no reviews yet.