ANYCUBIC Photon Mono M7 PRO 14K Resin 3D Printer, 170mm/h Fast Printing, 10.1” Mono LCD with COB LighTurbo 3.0 Source, Dynamic Temperature Control Resin Vat, Build Volume 8.77”x4.96”x9.05”

Features:

• Ultra Fast Speed: Anycubic Photon Mono M7 Pro achieved a high speed of 170mm/h on a 0.1mm layer thickness test using high-speed resin. At the same time, the printing speed of standard resin has been increased to 130mm/h, breaking boundaries and greatly improving printing efficiency, achieving true fast speed printing
• High-Precision 14K: With a 14K monochrome LCD screen with 13312*5120 resolution and 16.8×24.8 μm XY resolution, the Photon Mono M7 Pro is capable of printing holes as small as 0.3 mm in diameter, which is more than enough to handle fine printing tasks and make your models stand out.
• Advanced COB LighTurbo 3.0: The COB light source system, combined with Fresnel lenses and front-facing reflectors can reach the light angle within 3°, and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that every layer of the model is successfully exposed and successfully removed from the mold, and improves the printing success rate.
• Upgraded Assisted Features: Dynamic temperature control resin vat will adjust the temperature of the resin material to maintain the optimal print temperature at all times for print success. And resin auto-fill feature allows for automatic filling and one-key recycling of remaining resin
• Intelligent Design: On the basis of component connection status detection, residue detection, resin level Detection, failed print detection, and release film lifespan management, Photon Mono M7 Pro has added platform installation status detection. 6 types of intelligent detection can achieve startup detection, simplify printing process, and reduce problems caused by disoperation.